Skip to content
DSP-2800 Portable MOOC Wireless Microphone

Portable MOOC Wireless Microphone

DSP-2800

Stable multi-channel wireless operation for meetings, presentations and live applications.

Product Overview

Clear, dependable audio for professional spaces

Stable multi-channel wireless operation for meetings, presentations and live applications.

Technical Information

Technical specifications

English specifications are provided for review. Missing or conflicting source values are marked in the table; confirm these with ARTCK before specifying the product.

English technical specifications
Transmitter audio frequency response50 Hz–12 kHz
Transmitter modulationO-QPSK; BT = 0.5 Gaussian
Transmitter RF output power2.5 mW
PairingID-code pairing with automatic connection locking
Transmitter sensitivity-82 dBm at 1% BER
Transmitter current consumption50 mA
Continuous operating time>20 hours
Battery3.7 V lithium-polymer; 1200 mAh
Battery charging timeApproximately 4 hours
Transmitter weight70 g
Transmitter dimensionsSource reads 108 × 33 × 2l mm; final dimension requires confirmation
Transmitter functionsMicrophone, laser pointer and PPT page control
Receiver / transmitter frequency rangeSource lists 2.4–2.483 MHz despite describing 2.4G operation; verify the unit
Wireless transmissionTwo-way 2.4G frequency hopping, as stated in the source
Receiver frequency response50 Hz–12 kHz
Receiver modulationO-QPSK; BT = 0.5 Gaussian
Receiver sensitivity-82 dBm at 1% BER
Receiver signal-to-noise ratio≥110 dB
Receiver harmonic distortion≤0.5%
Receiver audio output3.5 mm
Receiver supply / dataUSB; standard USB and Micro-USB ports
Operating range≥50 m
Operating temperature-30 to 50 °C
Transmitter connectionsExternal MIC input; charging/data-upgrade connection
ControlsLaser pointer, recording start/resume/pause/stop, PPT pages and power switch
Recording shortcutsStart/resume Alt+R; stop Alt+S; pause appears as atl+P in the source and requires confirmation
IndicatorsBattery level, recording, pause, stop and pairing status
Connection timeNot supplied in the source
View original Chinese specifications
产品推荐:
手持终端集PPT翻页、激光教鞭、无线话筒于一身;
新一代2.4G技术,创新处理代码,超强抗WIFI干扰;
绿色节能产品,超低辐射,超低功耗,一次充电,可用一周;
发射端内置咪头,可手持使用,也可配头戴使用;
智能化设计,即插即用,随开随用;
便携式接收机,针对移动使用设计,配合移动录课使用。
手持端提供三个控制按键,可定制接口,与录播软件配套对接,特别适合慕课录课使用;
便携式接收端,可方便与笔记本电脑、移动录播主机、教学一体机等连接使用。
接收端:
频率范围: 2.4~2.483MHz
频率响应: 50Hz~12KHz
调制方式: O-QPSK , BT=0.5Gaussian
连接方式: ID 对码,自动连接锁定
接收方式:双向 2.4G 短波跳频
灵敏度: -82dBm(1%BER)
信噪比:≥ 110dB
谐波失真:≤ 0.5%
音频输出: Ø 3.5 音频输出口
电源: USB 供电
数据接口:标准 USB 及 Micro USB 双接口
1. 3.5音频输出口
2. 标准USB供电口
3. Micro USB供电口
发射端:
频率范围: 2.4~2.483MHz
频率 n 向应: 50Hz~12KHz
调制方式: O-QPSK , BT=0.5Gaussian
发射功率: 2.5mW
链接方式: ID 对码,自动连接锁定
传输方式:双向 2.4G 短波跳频
连接时间: 秒
灵敏度: -82dBm (1%BER)
耗电电流: 50mA
连续音频传输时间: >20 小时
供电方式: 3.7V 聚合物锂电池
电池容量: 1200mAH
电池充电时间:约 4 小时
工作范围:≥ 50 米
温度范围: -30~50 ℃
重量: 70g
尺寸: 108mmx33mmx2lmm
1. MIC输入接口
2. 充电及数据升级接口
3. 激光光源孔
4. MIC拾音口
5. 电池电量显示
6. 录播工作中状态图示(兼对频状态提示)
7. 录播暂停状态图示
8. 录播停止状态图示
9. 激光教鞭键
10. 开始、 继续键►:alt+R; 暂停键 II:atl+P
11. 停止键:alt+S
12. PPT翻页键
13. 开关
产品中心

Project Support

Need help specifying DSP-2800?

Tell us about your room, users and system requirements. ARTCK will help you select a compatible solution.

Contact ARTCK Audio