Two-Channel Power Amplifier
PL1000
Reliable professional amplification with flexible system integration.
Product Overview
Clear, dependable audio for professional spaces
Reliable professional amplification with flexible system integration.
Technical Information
Technical specifications
English specifications are provided for review. Missing or conflicting source values are marked in the table; confirm these with ARTCK before specifying the product.
| Amplifier type | 2-channel power amplifier |
|---|---|
| Maximum stereo output per channel | 1000 W at 8 Ω; 1700 W at 4 Ω, FTC 20 Hz–20 kHz, 0.1% THD as stated by the source |
| Signal-to-noise ratio | 95 dB, 20 Hz–20 kHz, 8 Ω |
| THD+N | Source reads 400@8Ω without a valid distortion unit/value; requires confirmation |
| Cooling | 2 continuous-running fans; rear-to-front airflow |
| Input | XLR |
| Outputs | Two-pin XLR and barrier terminals, as described in the source; verify connector type |
| Front-panel controls | AC power switch and separate channel 1/2 gain controls |
| Rear-panel mode selection | Stereo / parallel |
| Indicators | ACTIVE red; SIGNAL green; PROTECT orange; CLIP red |
| Protection | Limiting, short circuit, DC/AC faults, overload and overtemperature |
| Dimensions (W × D × H) | 468 × 482 × 98 mm |
| Weight | 38 kg |
| Power supply | AC 220 V |
View original Chinese specifications
两通道纯后级功放
技术参数
*短机箱，节省机柜空间，方便安装。
*铝面板设计，工艺精湛，大方得体。
*声音效果赏心悦耳，低频强劲震撼。
*压限/短路/直流/过载/过热等多重保护电路。
立体声模式（双声道驱动）每声道最大输出功率：
8Ω/FTC20HZ-20KHZ/0.1%THD 1000W
4Ω/FTC20HZ-20KHZ/0.1%THD 1700W
信燥比：（20HZ-20KHZ） 8Ω 95DB
总谐波失真：THD+N 400@8Ω
冷却方式：2个持续风扇,气流从后至前吸出
输入端： XLR插脚
输出端：两芯卡侬,条形端子
前面板：交流电电源开关,声道1/2单独增益控制
后面板：立体声/并接调制
指示灯：正常:ACTIVE(红色),信号:SIGNAL(绿色),过载保护:PROTECT(橙色),失真:CLIP(红色)
具有输出短路,过热,自动限幅,长期输出功率,直流/交流保护装置
尺寸(宽x深x高) 468x482x98mm
重量 38KG
电源：~220V
产品中心
技术参数
*短机箱，节省机柜空间，方便安装。
*铝面板设计，工艺精湛，大方得体。
*声音效果赏心悦耳，低频强劲震撼。
*压限/短路/直流/过载/过热等多重保护电路。
立体声模式（双声道驱动）每声道最大输出功率：
8Ω/FTC20HZ-20KHZ/0.1%THD 1000W
4Ω/FTC20HZ-20KHZ/0.1%THD 1700W
信燥比：（20HZ-20KHZ） 8Ω 95DB
总谐波失真：THD+N 400@8Ω
冷却方式：2个持续风扇,气流从后至前吸出
输入端： XLR插脚
输出端：两芯卡侬,条形端子
前面板：交流电电源开关,声道1/2单独增益控制
后面板：立体声/并接调制
指示灯：正常:ACTIVE(红色),信号:SIGNAL(绿色),过载保护:PROTECT(橙色),失真:CLIP(红色)
具有输出短路,过热,自动限幅,长期输出功率,直流/交流保护装置
尺寸(宽x深x高) 468x482x98mm
重量 38KG
电源：~220V
产品中心
Related Products
Explore compatible ARTCK products
Project Support
Need help specifying PL1000?
Tell us about your room, users and system requirements. ARTCK will help you select a compatible solution.